. GAR-BRO Manufacturing Co.
... 104 Bolton Sullivan Drive - P.O. Drawer 1077 - Heber Springs, Arkansas 72543-1077
Download Our Current Price Sheet
 

Concrete Placing Equipment

 

"G" Series General Purpose Concrete Buckets
The standard bucket for placing a wide range of concrete by the general contractor. Specifications

 

 "R" Series Lightweight Round-Gate Concrete Buckets
30% to 40% lighter than the standard bucket, this bucket is ideal for the general contractor. Specifications

  "L" Series Lightweight Laydown Buckets
A lightweight laydown bucket with the ability to handle a large capacity at a low loading height. Specifications
  Extended Gate Lightweight Laydown Buckets
A laydown bucket with a side discharge feature. Specifications
  Combo Buckets
Featuring a double clamshell gate with vertical front discharge, fork pockets and a selection of side chutes for a variety of uses. Specifications
  Skidsteer Bucket
The GAR-BRO "Skidsteer" Bucket is a newly developed concrete bucket specifically designed as an attachment for the popular fleet of skidsteer loaders. Specifications
Rock Hoppers   Rock Hoppers
A heavy-duty hopper that facilitates the placing of bedding material on utility jobs. Specifications
Roofers Buckets   Roofers Buckets
A lightweight bucket designed for the placing of chat by the roofing contractor. Specifications
Heavy Duty Laydown Buckets   Heavy Duty Laydown Buckets
A bucket that combines a low loading height with a large capacity for placing low slump concrete. Specifications
 

Model "A" Low Slump Buckets
A heavy-duty bucket that reliably handles large aggregate, low slump concrete, and features air-operated discharge gates. Specifications

Model "D" Low Slump Buckets
Same as Model "A" above except manual gate operation. Not pictured. Specifications

Automatic Bucket Hooks
The automatic hook is for use on large, multiple bucket operations where fast hook-up is important. Specifications
  Automatic Bucket Hooks
Low Slump Cableway Buckets
These buckets are designed for use with a cableway, but may also be used with a crane. The Bucket remains attached to the lifting device and is generally charged with a transfer car. The buckets feature large double clamshell gates and the GAR-BRO patented Venturi throat for fast, complete discharge of the concrete. Gate operation may be hydraulic or pneumatic.
 
Wide Flange Receiving Hoppers
A special hopper that can be attached to the entire range of 14-inch-wide flange columns to place floor slabs in multi-story buildings once the steel is in place. Specifications
  Wide Flange Receiving Hoppers
Precaster's Buckets
This bucket's extra-wide gate is used for pouring pre-cast forms, slabs, etc. Specifications
 
Barrel Loading Hoppers
This hopper, equipped with manual or air-operated gate(s), is designed to minimize labor in the loading of wet or dry materials in standard 55-gallon drums. Engineered for hazardous waste and environmental cleanup projects. Specifications
  Barrel Loading Hoppers
Bond Beam Buckets
A specialized bucket used to pour columns, walls and nearly any placement challenge. Specifications
  Bond Beam Buckets

Forklift Hoppers
A hopper used for distributing materials such as grout and concrete with a forklift. Specifications
  Forklift Hoppers
Bin Gates
These discharge gates are available in standard sizes to fit most bins and silos. Special sizes can be built to meet specific job requirements. Double clamshell gate pictured. Specifications
  Bin Gates
Vertical Front Receiving Hoppers
These hoppers allow for temporary storage of concrete and other materials. Available with single or double discharge gates.
 
PHOTO NOT
AVAILABLE
Vertical Front Floor Hoppers
Floor hoppers facilitate the loading of concrete carts and wheelbarrows. Available with single or double discharge gates.
 
Vertical Front Receiving Hoppers
PHOTO NOT
AVAILABLE
  Center Discharge Receiving Hoppers
Storage hoppers with the discharge gate in the center of the hopper. Available with single or double discharge gates.
Center Discharge Floor Hoppers   Center Discharge Floor Hoppers
To facilitate loading of motorized carts, the discharge gate is located in the center of the hopper so the operator can conveniently reach the gate handle. Available with single or double gates.
  Wheelbarrows
There a variety of rugged wheelbarrows designed for placing concrete and other heavy work. Wheelbarrows available are wood handled, steel handled, two wheeled, and foundry/industrial.
 
Concrete Carts
These carts are the best and most efficient way to manually place concrete. Specifications
Dolly Chassis with 400 x 18 Tires   Dolly Chassis with 400 x 18 Tires
There are 1,000 uses for this frame and wheel assembly which allows conversion to fit loads such as lengths of pipe, poles, lumber, bales and boxes. Specifications

home | concrete placing | accessories | precast solutions | custom equipment | conventions | contact

Have questions or need a quote?
E-Mail GAR-BRO for answers or a quotation at GARBROCO@GARBRO.COM.

For your convenience, GAR-BRO fully utilizes downloadable PDF files.
Adobe Reader is free to download and needed to view our downloadable files.
Get Adobe Reader

GAR-BRO Manufacturing Co.
104 Bolton Sullivan Drive - P.O. Drawer 1077 - Heber Springs, Arkansas 72543-1077
Telephone: 1-501-362-8171 or 1-800-643-8192 Fax: 1-888-643-8192
2001 - 2008 Copyright All Rights Reserved. Site Design & Layout by Web Imagery.